Results 1 to 4 of 4

Thread: Scanning and Re-assembling a Booklet

  1. #1
    IV Newbie
    Join Date
    Aug 2014
    Posts
    2
    Version
    IrfanView 4.37
    OS
    32-bit Win 7 Professional SP1
    CPU Cores
    2

    Default Scanning and Re-assembling a Booklet

    The following outlines what I did to scan a booklet into a pdf document. It serves as a tutorial. The only question posed is whether you can see any improvements in my roundabout strategy. All feedback is welcome. No product is endorsed, and they are mentioned as I used them.

    I recently thought it might be a good idea to scan my daughter's workbooks and set about it without thinking it through. I post this as it may be helpful to others.

    I had access to a page scanner with a feeder that could continuously scan loose pages. The books had been stapled at the centre, so removing the staples and unfolding I had a lot of A3 size papers. The cover, I scanned separately.

    The first book took me a couple of days, and I nearly gave up until I thought hard for improvements to the process. Here is the process so far. Any improvements and suggestions are welcome.

    Scan the pages in order. Taking care to scan the pages in order saves heaps of time later. For this discussion, I will take a workbook that has 80 numbered pages on it. There are FOUR pages to a sheet. So there are 20 sheets. The numbering (on the book after scanning) will not be continuous as, for example, page 1 and page 80 will be on the same scan, page 1 on t the right and page 80 (the last) on the left.

    Split the pages into half. This is where Irfanview comes to the rescue. I'd always had friends speak highly of Irfanview, but found the Batch feature only when I need to cut so many pages in half.

    The scanner labelled each of the sides of sheets it scanned sequentially (it scanned both sides).. I had to cut them in half.

    I ran two batches on the same files, once cropping the right (or Odd) side, and once the left (or Even) sides.

    These were the settings I used:

    The image size (can get by pressing "I" in Irfanview when viewing the image)

    Click image for larger version. 

Name:	image001.png 
Views:	510 
Size:	2.0 KB 
ID:	3850

    was 3307 wide by 2338 tall.

    To crop the right side I used (in File --> Batch --> Advanced

    Click image for larger version. 

Name:	image002.png 
Views:	467 
Size:	3.6 KB 
ID:	3851

    And rename options
    Click image for larger version. 

Name:	image003.png 
Views:	396 
Size:	4.6 KB 
ID:	3852

    (Remember at this stage I was doing the cover seperately. Later I found a neat trick to do it together and save another few minutes)

    I had copied all the scanned files to a directory, and Then, in B(atch) mode, set that as the output directory and added all the files and ran the batch (first with above settings to crop right hand odd pages) then with the settings below for even pages.

    Click image for larger version. 

Name:	image004.png 
Views:	386 
Size:	3.1 KB 
ID:	3853

    Click image for larger version. 

Name:	image005.png 
Views:	356 
Size:	1.3 KB 
ID:	3854

    If you are confident enough, you can ask Irfanview to delete the original scanned files after cropping at this stage by turning on (in B  advanced)
    Click image for larger version. 

Name:	image006.png 
Views:	367 
Size:	2.0 KB 
ID:	3855

    before running the last batch command.
    (don't forget to turn it off for the first part of the next book)

    At the end of this, I had a series of Odd pages number oNN and even pages numbered eNN which seemed hopeless out of order. However, if you scanned them in order, you'd notice that there is pattern in the madness.

    For example, in a book having only 20 pages,
    Click image for larger version. 

Name:	image008.png 
Views:	473 
Size:	1.5 KB 
ID:	3856


    You'll notice that e01 is the last page, o01 the first, e02 the second, o02 one but last etc.

    So it's just a matter of renaming them to their page numbers. I do this in the dos prompt (command line) and generated the commands using an excel macro that just takes in how many pages there are and generates the rename commands.

    Click image for larger version. 

Name:	image009.png 
Views:	428 
Size:	6.7 KB 
ID:	3857


    The macro (that the command button runs) looks like this, or you can download the excel file (not yet figured out how to upload it code below)



    Code:
    Sub Macro1()
    ' by rumeyj
    
    Dim i As Integer, lastPg As Integer
    Dim extN As String, othN As String
    
    lastPg = Cells(2, 2).Value 'this cell B2 is where the total number of pages is input
    
    If lastPg Mod 4 > 0 Then lastPg = lastPg + 4 - (lastPg Mod 4)
    
    Range("a5:a100").Clear
    Range("A4").Select
    
    For i = 1 To lastPg / 2
        extN = Format(i, "00")
        othN = Format(lastPg - i + 1, "00")
        
    If i Mod 2 Then 'i is odd
        'Debug.Print i; "i is odd"
        PonNextLine ("rename e" & extN & ".jpg " & othN & ".jpg")
        PonNextLine ("rename o" & extN & ".jpg " & extN & ".jpg")
    Else
        PonNextLine ("rename e" & extN & ".jpg " & extN & ".jpg")
        PonNextLine ("rename o" & extN & ".jpg " & othN & ".jpg")
    End If
    Next i
    End Sub
    
    Function PonNextLine(ln As String)
    'print on next line
    ActiveCell.Offset(1, 0).Select
    ActiveCell.Value = ln
    End Function
    Running this macro with, say 20 in cell B2 (that is to say 20 pages) gives,

    rename e01.jpg 20.jpg
    rename o01.jpg 01.jpg
    rename e02.jpg 02.jpg
    rename o02.jpg 19.jpg
    rename e03.jpg 18.jpg
    rename o03.jpg 03.jpg
    etc.

    Now I go to a command window (type Win-R and 'cmd' in that and enter)

    Go into the directory where the files are saved. E.g. if they are in d:\user\home\book1\
    Type
    Code:
    d:
     cd d:\user\home\book1\
    copy the generated commands from excel (highlight and Ctrl+C) and paste (right-click and paste) into the command window

    this should rename all the files with their correct page numbers.

    After the pages are renamed, it's time to do minor editing on each page, if necessary. You can use the Irfanview paint toolbar (F12 while viewing image) and eraser tool to remove minor blemishes. I used Gimp, which is pretty much an overkill for what I was doing.

    Once the images are spic and span, you can use Irfanview to combine them into a single PDF file with Options  Multipage Images  Create Multipage PDF (you need the plugin). I found the generated pdf rather large, and just dumping them into MS-Word and saving as a pdf produced significantly smaller files. I am sure there is some dialogin Irfanview where I can set the output quality but haven't stumbled upon it yet.

    Hope this helps… all comments and feedback welcome.

  2. #2
    Moderator Enterprise User Bhikkhu Pesala's Avatar
    Join Date
    May 2007
    Location
    East London
    Posts
    6,166
    OS
    64-bit Win 10
    CPU Cores
    1

    Default

    It's something I have done a few times with poor quality books printed in Burma that I needed to edit. I didn't bother with batch processing as each page needed rotating, and perhaps some editing with IrfanPaint too.

    1. I broke the book binding and scanned facing pages in order using batch scanning
    2. After each scan
    3. I applied a custom selection set up for the left page and cropped it after deskewing the scan with the IrfanPaint plugin
    4. I saved the left page with the correct page number, page 002 etc.
    5. I clicked undo, deskewed to suit the right page
    6. I applied the custom selection and moved it to the right
    7. I cropped the right page and saved it as 003, etc.
    8. I scanned the next pair of pages.
    9. I combined all of the pages in a multipage TIF for easy viewing in IrfanView.

    If you want to use batch processes, I suggest running two process on your saved scans, and crop the left and right pages separately, then incrementing the page numbers by 2.
    Last edited by Bhikkhu Pesala; 28.08.2014 at 05:38 AM.

  3. #3
    IV Newbie
    Join Date
    Aug 2014
    Posts
    2
    Version
    IrfanView 4.37
    OS
    32-bit Win 7 Professional SP1
    CPU Cores
    2

    Default

    Quote Originally Posted by Bhikkhu Pesala View Post
    If you want to use batch processes, I suggest running two process on your saved scans, and crop the left and right pages separately, then incrementing the page numbers by 2.
    Thanks for your prompt feed back. I did do that. However, because, there are 4 pages on a sheet and they are not consecutive, I was into the whole renaming macro thing. But I see where you are going. can rename the odd pages, then the even ones separately by reversing the sort order and incrementing by two...this works if you originally scanned sheets having 2 pages, not four.

    Thanks again.
    Last edited by rumeyj; 28.08.2014 at 06:16 AM.

  4. #4
    Professional User Mij's Avatar
    Join Date
    Mar 2007
    Location
    Camberley, Surrey, UK
    Posts
    2,763
    Version
    IrfanView 4.51
    OS
    32-bit Win 10
    CPU Cores
    3

    Default

    In this case you would need to do the renaming in 4 passes of the batch process.
    One trick I have used in the past for selecting sets of images such as every 4th one, is to use Irfanview thumbnails. By adjusting the width of the Window you can make every 4th image line up in columns as in the image below. It is then fairly quick to hold down the Ctrl key while you click on each of the thumbnails in the appropriate columns.
    Then press B and the Batch dialog opens with the selected set ready for your first pass.

    Click image for larger version. 

Name:	Every 4th.png 
Views:	652 
Size:	752.6 KB 
ID:	3869
    Last edited by Mij; 01.09.2014 at 09:49 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •